Comprehensive understanding and transparency thanks to the Production Part Approval Process (PPAP) in the automotive industry: right from the start of series production, the process must be carried out by every supplier across the entire supply chain. Read here to find out exactly what this means:

Production Part Approval Process (PPAP) – a Definition

The Production Part Approval Process, or PPAP for short, is a procedure from the automotive industry and is used for the sampling of series parts. This procedure is primarily concerned with assessing the quality of delivered parts and determining whether they meet the specified requirements. PPAP is a central element in the sampling process, in which all information about tests and requirements can be documented.

Goals of the PPAP

The primary aim of the PPAP is to assess the quality of delivered parts and determine whether they meet the specified (quality) requirements. The result of the assessment determines whether or not a series release can be issued.

The PPAP enables suppliers to demonstrate that they have understood the customer's design and that they can manufacture products in series production that consistently meet all the customer's requirements and specifications while maintaining the production rate.

The PPAP sampling process is subject to clear rules and standards. Right from the start of series production, the procedure must be carried out by every supplier throughout the entire supply chain. This ensures comprehensive understanding and transparency in the automotive industry.

This Is How the Production Part Approval Process (PPAP) Works

While the exact PPAP procedure can vary greatly from company to company in individual areas (e.g. ordering of parts, delivery, time of sampling), five submission levels are used for all sampling processes. In these five steps, the part to be inspected is first sampled and then classified according to previously defined criteria. At the end of the process, an assessment is made which is used to decide whether the sampled part meets the requirements, needs to be improved or even requested again.

The so-called part submission warrant (PSW) is used for this purpose. The part submission warrant summarizes and documents all important information on the requirements and tests of a sample. The part submission confirmation can be understood as the cover sheet for the sampling, on which central information such as key data on the delivered product and the supplier is recorded. It also confirms that the samples presented were manufactured under complete series conditions.

PPAP Submission Levels

The following five stages provide information on whether the parts meet the requirements, need to be reworked or have to be requested again.

  • Submission level 1: The customer receives the parts submission confirmation.
  • Submission level 2: The customer receives the parts submission confirmation with sample parts and some supporting data.
  • Submission level 3: The customer receives the part submission confirmation with sample parts and complete supporting data.
  • Submission level 4: The parts submission confirmation now also addresses other, customer-specific requirements.
  • Submission level 5: The part submission confirmation with sample parts and complete supporting data is available for evaluation at the production site.

The customer checks the submitted samples and documents and then decides whether or not to issue a series release. If approval cannot be granted, a corresponding rework is required. Re-sampling is then also often necessary.

The Relevance of PPAP in Quality Management

PPAP is all about the quality of the delivered parts. In this context, quality means that the parts of the series tools or series processes correspond to the drawings. A PPAP can also verify the quality of suppliers and their production processes. In order to save time and costs, it is important that errors in production are avoided before they can be repeated.

Laptop, darauf Erstbemusterung in BabtecQ
Software-supported Part Approval Process

BabtecQ a is QM software that not only offers software-supported creation of initial sample inspection reports and supports the PPA and PPAP processes, but also covers other quality management processes. For the evaluation of products, users carry out initial sample inspections on the basis of defined product characteristics and then document them in an initial sample inspection report (ISIR).

To the module "Part Approval Process"

Comments

No Comments

Write Comment

Your Newsletter for Quality

With our Q.Mail, we deliver news from the world of quality management directly to your inbox. This newsletter for QM is issued every two months and is of course free of charge and without obligation.

Networking und der Austausch mit Branchenkollegen aus dem Qualitätsmanagement
Be our Guest at Exclusive Events

We invite you to exciting presentations by renowned experts, interdisciplinary dialogue and high-quality networking – find the event format that suits you!